Table of Contents
Advertisement
5 CHANGING SET VALUE
The set value for the distinction can be changed in detail according to the
condition of the work to be distinguished and the circumstance of the line
where this sensor is attached.
See "Set Items List" (
set items.
Changing Set Value
1
Cofirm that
in yellow in the standard screen.
(If not, press
times.)
2
Press
Then, the set value reference screen is displayed.
3
Display an intended set item
whose data to be changed by
pressing
PURPLE
YELLOW
BLUE
: Set item being locked
Pressing
the set item displayed will change over Lock / Release condition of
the set value alternately.
Also, Lock / Release condition of all set items can be switched all
at once.
See "Permission to Set Value Initialization (INITIALIZ)" on
Page 56.
48
Ramco Innovations
See Page 52.) for the details of the changeable
PARAMETER
or
.
or
.
: Independent set item for each bank
: Set item common to all banks
and
for 3 seconds or more simultaneously with
www.optex-ramco.com
is displayed
several
phone 800-280-6933
Set item
Set value
Advertisement
Table of Contents
