Masking - Optex CVS2 Instruction Manual

Masking

The comparison target may not be included by the masking zone by the
initial setting. In such a case, widen the comparison target zone or move
its position by editing the masking zone.
■ Edition of Masking
Edit masking from the teaching menu according to the following
procedures.
Here, the method to make the triangle and its surrounding at the upper
left in the screen the target zone by editing the masking zone is explained
below as an example.
The following two methods are available to select the masking
zone.
① M ethod to select the zone occupied by the color in the masking
window or other zone
② Method to select the masking window itself or other zone ②
The following explains the edition of masking by the method.
1
Select
TEACHING
in the target screen.
TEACHING
2
Press .
The teaching menu is displayed.
Ramco Innovations
by pressing
is displayed in yellow.
www.optex-ramco.com
USE OF APPLIED FUNCTIONS
phone 800-280-6933
4
29