Introduction - Santak ARRAY 4 User Manual

1. I NTRODUCTION
1.1 Product overview
ARRAY 4~24kVA system is of single phase output and compatible with either
three-phase or single phase mains input, and adopts a drawer-type high intelligent modular
design with high efficiency and performance. It is a scalable power protection system in the
range of 4 to 24kVA, this gives you to protect your investment while enabling your system to
grow.
The system frame can hold a maximum of six UPS-Modules. The standard UPS-Module
of 4kVA is hot-swappable, it becomes easy and simple for future power protection demands
by adding or removing UPS-Module(s) without interruption to the load connected.
ARRAY contains a Communication Module which is to monitor and communicate with all
the UPS-Modules and provides comprehensive information about the UPS system to the user
interface.
Designed with the proven on-line, double conversion architecture, ARRAY offers the
greatest degree of availability in power protection and provides continuous, high-quality AC
power to connected critical equipment, protecting them against any power disturbances due
to blackouts, surges, spikes, lightning and line noise interference.
1.2 Description of Commonly Used Symbols
Symbol
Symbol & Description
Alert you to pay special
Caution of high
Alternating current source(AC)
Direct current source(DC)
Protective ground
Do not dispose with ordinary trash
Description
Recycle
1