7. OPERATION AND MAINTENANCE
7.1.6 Shutdown of the UPS system
1) Shutdown menu
press "ESC" and press ▲ or ▼ to select "UPS OFF"
UPS OFF
*If there is only one UPS module the UPS OFF will automatically select to "SWITCH TO
BYPASS". If the utility power fails, the UPS OFF will automatically select to "TURN OFF
OUTPUT"
3) Shutdown to bypass mode by selecting
"YES, CONFIRM" to continue, or "NO,
CANCEL" to exit.
CONFIRM
SW TO BYPASS
NO, CANCEL
YES, CONFIRM
5) Select "YES, CONFIRM" to shut down
the UPS system
UPS IS TURNING OFF
PLEASE WAIT...
2) Press
INQUIRE
4) Further confirmation after selecting "TURN
20
↵ ↵ ↵ ↵
UPS OFF SELECTION
SWITCH TO BYPASS
TURN OFF OUTPUT
OFF OUTPUT" in previous page.
CONFIRM
WARNING: OUTPUT OFF
NO, CANCEL
YES, CONFIRM
6) The UPS system has already been shut
down in Utility Power mode
UPS IS OFF
PRESS ANY KEY...
Need help?
Do you have a question about the ARRAY 4 and is the answer not in the manual?