Connecting To The Front Panel Usb Port - Extron electronics DTP2 T/R 211 User Manual

Connecting to the Front Panel USB Port

Use the mini Type B USB port on the front panel (see figure 11) to connect the transmitter or
receiver to a host computer to configure the unit with SIS commands.
1. Connect a USB A to mini B cable between the front panel USB Config port and a
USB port of the PC.
DTP2 T 211 Transmitter DTP2 T 211 T
Figure 11.
If this is the first time the DTP2 211 has been connected to the PC, the Found New
Hardware Wizard opens (see 12).
The first screen offers to connect to Windows Update to search the web for the
appropriate driver needed for the USB port to communicate with the DTP2 211. This is
not necessary if the USB driver is already on your PC.
Figure 12.
2. Click on the appropriate radio button (see figure 12):
• Select the Yes, this time only radio button (
connect to Windows Update only this one time.
Mini Type B
USB
USB Cable
STATUS
SEND
INPUT
POWER
LINK
CONFIG
OUTPUT
DTP2 T 211
OFF
itt
Connecting a PC to the DTP2 T 211 Front Panel USB Port
Found New Hardware Wizard Welcome Screen
Type A
USB
USB
Ports
PC
1
2
3
4
) if you want your computer to
1
DTP2 T/R 211 • Installation and Operation
1 2 3 4
WiFi
17