Table of Contents
Advertisement
Space
Figure 14.
Symbol Definitions
]
= Carriage return with line feed
}
or
= Pipe character or carriage return (no line feed) can be used interchangeably.
|
• = Space character
E
= W or Escape key can be used interchangeably.
W or
X!
= Input or Output
X@
= Verbose mode
0 = Clear/none
1 = Verbose mode (default)
2 = Tagged responses for queries
3 = Verbose mode and tagged responses for queries
X#
= Text string of up to 24 characters
Default = DTP2‑T‑211 or DTP2‑R‑211
Alphanumeric characters and hyphens only
No distinction between upper and lower case
No spaces
First character must be a letter and the last character cannot be a hyphen
X$
= Firmware version to the second decimal place
X%
= Audio input
0 = Auto (default)
1 = Digital
2 = Analog
X^
= Remote power
0 = No remote power (Off)
1 = DTP2 48 VDC (On)
X*
= Audio toggle switch
1 = DOWN —De‑embedded audio from the HDMI signal is output on the analog audio
2 = UP — Analog audio passed from the TX is output on the analog audio output.
ASCII to Hex Conversion Table
ASCII to Hex Conversion Table
output (default).
•
DTP2 T/R 211 • Remote Control
21
Advertisement
Table of Contents
