Programming - Tzora Easy Travel Elite Service Manual

4. PROGRAMMING OF THE SOLO CONTROLLER
4.1 Introduction
The EasyTravel electric system is operated by the Solo Controller manufactured by Penny & Giles Tech-
nologies Ltd. (UK).
4.2 The SP1 Programmer
The SP1 is a handheld programmer for use
with the Solo controller.
The programmer is a menu-driven device,
which plugs directly into the controller.
The SP1b Programmer
Version) can set all of the key controller
speed, acceleration and braking characteris-
tics, and allows different settings to be tried
out while the programmer is still plugged
into the controller. A context-sensitive help
function is available to guide users through
the menus and the SP1b can also display
error messages from the controller. This
allows any problems with the vehicle
electrical system to be identified and
corrected quickly.
WARNING
Programming should only be conducted by competent personnel with in-depth knowledge of Penny
& Giles electronic controllers. Incorrect programming could result in an unsafe set-up of a vehicle for
a user. Tzora Active Systems accepts no liability for losses of any kind if the programming of the
controller is altered from factory pre-set values.
Easy Travel – Service Manual
(Engineering
Rev. 0401
?
Yes
No
Enter
Figure 47
46