Tzora Easy Travel Elite Service Manual page 26

3.17 Column Release Cable Kit
Kit Number E0-00-1-080
Tools:
Phillips #2 Screwdriver
Wrench, open end 8 mm
Allen key 3 mm
Wire Cutter
Pliers
Crimp Tool
Loctite Adhesive # 496 (3854)
Light grease/lubricant
1. Remove Control Panel Cover, see in-
struction 3.1
2. Remove Cable End Cone, Vinyl Caps
and Screws (2x) and open Cable Locks
3. Slide Release Bushing out of Column
Frame and remove Cable with Lock Pin
and Spring
4. Thread Column Lock Pin (27-A) and
Spring (27-B) onto the Column Lock Pin
Cable (27-C)
5. Thread the Cable through the large hole
in Connecting Plate (27-D), Column
Lock Pin Housing (27-E) and the small
hole in Connecting Plate (27-F)
6. Apply some lubricant to Lock Pin (27-A)
7. Thread the Cable Guide (27-G) onto the
Cable and thread the cable into the Ca-
ble Guide Adjustable Stop (27-H) and
through the Tube of Column Frame (27-
J)
8. Thread the Release Bushing (27-K) with
the threaded hole down onto the Cable
making sure that the Cable passes
through the two Cable Locks (27-L).
Bring the Release Bushing (27-K) to its
approximate position and lightly secure
it with the Cable Locks (27-L)
Easy Travel – Service Manual
Figure 27
Rev. 0401 26