Tzora Easy Travel Elite Service Manual page 24

3.15 Upgrade from ET1 to ET1B
Kit Number E0-00-1-097
Tools:
Phillips #1 Screwdriver
Short Phillips #2 Screwdriver
Allen Key 5 mm
Allen Key 6 mm
1. Remove Screws (23-A) at the top and
bottom of the Controller Cover (23-B)
and remove Cover
2. Disconnect cables connected to Control-
ler (23-C) and Power Cable (23-D)
3. Disconnect Control Cable (24-A), wiring
to Controller (Fig. 24-B) and Contact
Pins Assembly (24-C)
4. Remove Front Wheel Assembly, see
instruction 3.11
5. Remove Securing Clip (page 21, 20-B)
on the underside of the Adapter Block
6. Carefully pull the Power Cable out of the
Column Frame
7. Insert new Power Cable from the motor
end into Frame, using the attached iron-
wire tool
8. Attach Power Cable to Controller, see
instruction 3.10
9. Place new Controller Cover, see instruc-
tion 3.3
10. Secure new Gear Motor, see instruction
3.12
11. Check drive, brake and freewheel func-
tion
Easy Travel – Service Manual
Figure 23
Figure 24
Rev. 0401 24