Tzora Easy Travel Elite Service Manual page 30

3.20 Column Frame
Kit Number E0-00-1-001 (Red ET1)
Kit Number E0-00-1-003 (Red ET1B)
Kit Number E0-00-1-002 (Blue ET1)
Kit Number E0-00-1-004 (Blue ET1B)
Kit Number E0-00-1-005 (Silver ET1B)
Tools:
Phillips #1 Screwdriver
Phillips #2 Screwdriver
Soldering Iron
Allen Key 2 mm
Allen Key 5 mm
Allen Key 6 mm
Pliers
Cutter
Cable Tie Tensioning Tool
The new Column Frame is issued with a
Control Cable, Power Cable and Column
Release Cable.
1. Remove from the old Column Frame:
a. Control Panel Assembly, see in-
struction 3.1
b. Controller Cover and Controller, see
instructions 3.3 and 3.4
c. Battery Contacts, see instruction 3.5
d. Interface Circuit Board, see instruc-
tion 3.6
e. Adapter Block, see instruction 3.13;
there is no need to disassemble
Gear Motor from Adapter Block, just
unsolder Power Cable from Motor
End, see instruction 3.10
2. Assemble the removed articles to the
new Column Frame
Easy Travel – Service Manual
Figure 29
Rev. 0401 30