Tzora Easy Travel Elite Service Manual page 42

3.33 Front Column Paint Protector Clips
Kit Number E0-00-1-072
Tools:
Screwdriver
Soft Mallet
1. Cover the flat tip of a screwdriver with
masking tape or electrical tape to pre-
vent paint damage
2. Remove the old Clip (42-A) from the
Tube (42-B) by prying on the end
3. Align the new Clip's slotted stud with the
hole in the Tube. Tap it into place using
a mallet or by squeezing with your fin-
gers
NOTE: Be sure to apply the correct clip on
each side of the column: the left-side clip
has a notch for the column release slide.
Easy Travel – Service Manual
Figure 42
Rev. 0401 42