Tzora Easy Travel Elite Service Manual page 25

3.16 Top Bearing for Steering Axis
Kit number E0-00-1-067
Tools:
Drive Punch
Press/Vise/Mallet
1. Remove Adapter Block, see instruction 3.13
and place it so that the bearing is free to
come out of the Pin Housing (26-B)
2. Remove the Bearing by tapping it with a
Drive Punch alternatively through each one
of the holes in the Top Pin Housing (Fig. 25-
A)
3. Place the new Bearing (26-A) in the Top Pin
Housing (26-B) and press/tap it into the Pin
Housing
! NOTE: Make sure the bottom of the
Bearing reaches its seating in the Pin
Housing
4. Reassemble the
instruction 3.13
Easy Travel – Service Manual
Adapter Block, see
Figure 25
Figure 26
Rev. 0401 25