Tzora Easy Travel Elite Service Manual page 18

3.11 Power Cable to Motor ET1B
Kit Number E0-00-1-056 (for serial # up to
and including 0212052)
Kit Number E0-00-1-093 (for serial #
0212053 up to 0304599)
Kit Number E0-00-1-095 (for serial #
0304600 and onwards)
Kit Number E0-00-1-706 (for serial #
starting with 11B)
Tools:
Phillips #2 Screwdriver
Pliers
Cutter
Cable Tie Tensioning Tool
(For serial # up to and including 0212052:
Soldering Iron
Solder
Hot Air Gun)
The wheels MAY be removed to facilitate
easier access for the replacement of parts,
see instruction 3.11
Fig. 16a refers to serial # up to and including
0212052, fig. 16b refers to serial # 0212053
up to 0304599, fig. 16c refers to serial #
0304600 and onwards.
1. Remove the Motor Cover, see instruc-
tion 3.8 (for serial # starting with 11B:
remove heat shrink)
2. Remove Cable Ties (16-A) from Motor
and Securing Clip (16-B) on the under-
side of the Adapter Block
3. Remove Wires from Terminals (16-C)
and Brakes (16-D)
For serial # up to and including
0212052:
Remove heat-shrink insulation and un-
solder the Wires from the Terminals (16-
C) and Brakes (16-D) on the Motor
4. Remove Controller Cover, see instruc-
tion 3.3
5. Detach the Wires from the Controller
(17-A) and Interface Circuit Board (17-B)
6. Carefully pull the Power Cable out of the
Column Frame
Easy Travel – Service Manual
Figure 16a
Figure 16b
Rev. 0401 18