Tzora Easy Travel Elite Service Manual page 22

3.14 Adapter Block Assembly
Kit Number E0-00-1-038
Kit Number E0-00-1-707 (for serial #
starting with 11B)
Tools:
Allen key 5 mm
Allen Key 8 mm
Wrench, open end 19 mm
Torque Wrench
Loctite Adhesive #242 (1312)
Light Grease/Lubricant
The wheels MAY be removed to facilitate
easier access, see instruction 3.11
1. Open Screw (20-A) and remove Clip
(20-B)
2. Unscrew the four Screws (20-D) secur-
ing Gear Motor (20-E) to the Adapter
Block (20-F) and put Gear Motor aside
3. Remove "Nylock" Lock Nut (21-A) and
Screw (21-B)
4. Slide Adapter Block (21-C) from Column
Frame (21-D)
NOTE: Ensure that the Column Release
Pin (21-E) is withdrawn before removing
and replacing the Adapter Block
5. Apply some Lubricant on the inside of
the connecting plates of the Column
Frame (21-D) and slide new Adapter
Block (21-C) in the Column Frame
6. Insert Screw (21-B) and secure it with
"Nylock" Lock Nut (21-A)
7. Apply Loctite to Screws (20-D) and se-
cure Gear Motor (20-E) to Adapter Block
(20-F)
8. Secure Power Cable (20-C) with Clip
(20-B) and Screw (20-A) to Adapter
Block
Easy Travel – Service Manual
Figure 20
Figure 21
Rev. 0401 22