Tzora Easy Travel Elite Service Manual page 38

3.28 Seat Attachment Bracket
Kit Number E0-00-1-064 (up to and includ-
ing serial # 0304999)
Kit Number E0-00-1-204 (serial # 0305001
and onwards)
Tools:
Phillips #2 Screwdriver
Loctite Adhesive # 242 (1312)
Refer to Figure 37
1. Remove the two Screws (34-A) holding
the Seat (34-D) to the "U" shaped Seat
Attachment Bracket (34-B) and the
Sleeves (34-C)
2. Remove the Bracket (34-B)
3. Attach the new Bracket (34-B) to Seat
(34-C). Place the Sleeves (34-C) be-
tween the holes in the Bracket (34-B)
4. Apply Loctite to the two Screws (34-A)
and tighten them until any lash is re-
moved. Over tightening may cause fric-
tion on the frame tube resulting in higher
folding effort.
Easy Travel – Service Manual Rev. 0401 38