Tzora Easy Travel Elite Service Manual page 29

3.19 Protector Roller Kit
Kit Number E0-00-1-081
Tools:
Allen Key 5 mm
Loctite Adhesive # 242 (1312)
1. Open Cap Nut (28-A), remove Threaded
Rod (28-B) and Roller (28-C)
2. Place the new Roller (28-C) between
the two Plates (28-D) and align with
holes
3. Insert Threaded Rod (28-B) though the
holes and Roller and right hand Plate
4. Apply a drop of Loctite to the Cap Nut
(28-A) and screw it onto the Rod (28-B);
avoid excess spill of Loctite which may
lock the Roller
5. Ensure that the assembly is not over-
tightened and that the Roller can rotate
freely
Easy Travel – Service Manual
Figure 28
Rev. 0401 29