Tzora Easy Travel Elite Service Manual page 20

3.12 Front Wheel Assembly
Kit Number E0-00-1-069
Tools:
Allen Key 6 mm
Loctite Adhesive #242 (1312)
Soft Mallet
1. Remove old Cap (18-A), Screw (18-B),
Disk (18-C) and Wheel (18-D)
2. Thoroughly clean the threaded hole in
the end of the Axle (18-E) of adhesive
residue
3. Slide the Wheel (18-D) onto Axle (18-E)
aligning the groove in the Adapter with
the Roll Pin on the Axle
4. Place Disk (18-C) on Screw (18-B) and
apply Loctite #242 (1312) adhesive to
the screw thread
5. Secure the assembly with Screw (18-C).
6. Fit new Cap (18-A) on the Wheel (18-D)
by gently tapping it with a mallet
Easy Travel – Service Manual
Figure 18
Rev. 0401 20