Tzora Easy Travel Elite Service Manual page 36

3.26 Seat Bottom Pad
Kit Number E0-00-1-062 (up to and includ-
ing serial # 0304999)
Kit Number E0-00-1-203 (serial # 0305001
and onwards)
Tools:
Phillips #2 Screwdriver
Loctite Adhesive # 242 (1312)
For removal and attachment of Seat, refer to
Figure 38, but without removing the Lock
Pin Cable.
1. Remove the two Screws (34-A) holding
the Seat (34-D) to the "U" shaped Seat
Attachment Bracket (34-B) and the
Sleeves (34-C)
2. Remove the Screws (36-A) and Bottom
Pad (36-B)
3. Align the tubes (36-C) of the Bottom
Pad with the holes in the Seat Bottom
(36-D)
4. Secure Bottom Pad (36-B) with Screws
(36-B)
5. Attach the Bracket (34-B) to Seat (34-
C). Place the Sleeves (34-C) between
the holes in the Bracket (34-B)
6. Apply Loctite to the two Screws (34-A)
and tighten them until any lash is re-
moved. Over tightening may cause fric-
tion on the frame tube resulting in higher
folding effort.
Easy Travel – Service Manual
Figure 36
Rev. 0401 36