Tzora Easy Travel Elite Service Manual page 34

3.24 Seat Assembly
Kit Number E0-00-1-060 (serial # up to and
including 0304999)
Kit Number E0-00-1-201 (serial # 0305001
and onwards)
Tools:
Phillips #2 Screwdriver
Pliers
Cutter
Crimp Tool
Loctite Adhesive # 242 (1312)
1. Disconnect the Lock Pin Cable from the
seat, see instruction 3.22
2. Remove the two Screws (34-A) holding
the Seat (34-D) to the "U" shaped Seat
Attachment Bracket (34-B), the Sleeves
(34-C) and Seat (34-D)
3. Insert the two frame seat support
"horns" (34-E) through the seat holes
(34-F)
4. Attach the replacement Seat (34-D) to
the Bracket (34-B). Place the Sleeves
(34-C) between the holes in the Bracket
(34-B) and tighten the two Screws (34-
A) until any lash is removed. Over tight-
ening may cause friction on the frame
tube resulting in higher folding effort.
5. Attach the Lock Pin Cable and adjust its
locking function, see instruction 3.22
Easy Travel – Service Manual
Figure 34a
Figure 34b
Rev. 0401 34