Tzora Easy Travel Elite Service Manual page 43

3.34 Flat Cap (front platform)
Kit Number E0-00-1-074
Tools:
Screwdriver and/or
Pliers
Soft Mallet
1. Cover the flat tip of a screwdriver with
masking tape or electrical tape to pre-
vent paint damage
2. Remove the old Cap (43-A)
3. Tap the Cap (43-A) gently into the Tube
end (43-B) using a mallet
NOTE: Sharp blows will deform the Cap
Easy Travel – Service Manual
Figure 43
Rev. 0401 43