Tzora Easy Travel Elite Service Manual page 15

3.8 Control Cable
Kit number E0-00-1-054
Kit Number E0-00-1-702 (for serial # start-
ing with 11B)
Tools:
Phillips #2 Screwdriver
1. Open Control Panel Cover, see instruc-
tion 3.1
2. Open Controller Cover, see instruction
3.3
3. Disconnect Control Cable from Control
Panel (5-C) and Interface Circuit Board
(12-A)/Controller (10a-C)
4. Remove Control Cable
5. Insert new Control Cable (if needed, re-
move the Paint Protector and replace it
with a new one after the Control Cable is
inserted, see instruction 3.32)
6. Connect Control Cable to Control Panel
and Interface Circuit Board/Controller
7. Reassemble Controller Cover and Con-
trol Panel Cover, see instructions 3.1
and 3.4
8. Check all Control Panel and Controller
functions: drive, brake, speed and indi-
cation
Easy Travel – Service Manual Rev. 0401 15