Tzora Easy Travel Elite Service Manual page 44

3.35 Front Platform Paint Protector Clips
Kit number E0-00-1-073
Tools:
Screwdriver
Soft Mallet
1. Cover the flat tip of a screwdriver with
masking tape or electrical tape to pre-
vent paint damage
2. Remove the old Clip (44-A) from the
Tube (44-B) by prying on the end
3. Align the new Clip's slotted stud (44-A)
with the hole in the Tube (44-B). Tap it
into place using a mallet or by squeez-
ing with your fingers
Easy Travel – Service Manual
Figure 44
Rev. 0401 44