Tzora Easy Travel Elite Service Manual page 13

3.6 Interface Circuit Board ET1B
Kit number E0-00-1-058
Tools:
Phillips #1 Screwdriver
Phillips #2 Screwdriver
1. Remove Controller Cover, see instruc-
tion 3.3
2. Disconnect Control Cable (12-A), Free-
wheel Cable (12-B), wiring to Controller
(12-C), Contact Pins Assembly (12-D)
and to Power Cable (12-E)
3. Unscrew 3 Screws (12-F) and remove
Interface Circuit Board (12-G)
4. Secure new Interface Circuit Board (12-
G) with Screws (12-F)
5. Connect Control Cable (Fig. 12-A),
Freewheel Cable (12-B), wiring to Con-
troller (12-C), Contact Pins Assembly
(12-D) and Power Cable (12-E)
6. Reassemble Controller Cover
7. Check drive, brake and freewheel op-
eration
Easy Travel – Service Manual
Figure 12
Rev. 0401 13