Tzora Easy Travel Elite Service Manual page 40

3.30 Folding Lock Pin Kit
Kit Number E0-00-1-065
Tools:
Circlip pliers
1. Remove the old Pull Ring (39-F), Circlip
(39-E) and Washer (39-D). Extract the
old Spring (39-A) and old Pin (39-C)
from the Pin Housing (39-B)
2. Insert new Spring (39-A) and Pin (39-C)
into Pin Housing (39-B)
3. Apply pressure to the end of the Pin so
that it projects through the Pin Housing,
place Washer (39-D) and fit Circlip (39-
E) into its groove at the end of the Pin
4. Insert the Pull Ring (39-F) into the hole
in the end of the Pin
5. Test the assembly to ensure that the Pin
returns to its original position after pull-
ing on the Pull Ring
3.31 Ring for folding lock
Kit Number E0-00-1-066
Refer to Figure 39.
1. Remove old Pull Ring from the Pin
2. Insert the Pull Ring (39-F) into the hole
in the end of the Pin
Easy Travel – Service Manual
Figure 39
Rev. 0401 40