Installation Without Mounting Plate; Installation With Mounting Plate - Pilz PSEN ml s 1.1 Operating Manual

Installation
8.3.1

Installation without mounting plate

1. Attach the safety switch to the swing gate/sliding gate.
2. Use four M5 screws to fix the safety switch to the mounting surface.
8.3.2

Installation with mounting plate

1. Attach the mounting plate to the swing gate/sliding gate.
2. Use four M5 screws to fix the safety switch to the mounting plate.
Operating Manual PSEN ml s 1.1/2.1/2.2
1004710-EN-05
31
Fixing screws in parallel/side-on to actu-
ator, no mounting plate
Provide the mounting surface with tapped
holes as indicated.
Fixing screws in parallel/side-on to actu-
ator, with mounting plate
Provide the mounting surface with tapped
holes as indicated.
ø 8,5
| 43