Table of Contents
Advertisement
Installation
8
Installation
8.1
Important information
}
Safety switches and actuators must be positioned so that they are secured against a
change of position.
}
Install safety switch and actuator so that the actuator is only loaded in closing direction.
}
To fix the safety switch, there are drill holes on three sides.
As a result, the safety switch can be installed on the frames of left and right hinged sliding
gates and swing gates.
}
The actuator is installed with the back cover on the mounting surface.
Operating Manual PSEN sl2-IL1/2/3-P
1005909-EN-02
WARNING!
Potential loss of safety function due to gross manipulation
Depending on the application, serious injury or death may result.
Use appropriate installation measures to prevent
– The wiring being modified.
– A short circuit being generated on the connector.
– The possibility of using a second actuator to open the safety gate.
CAUTION!
The unit's properties may be affected if installed in an environment contain-
ing electrically or magnetically conductive material. Please check the oper-
ating distances and the assured release distance.
INFORMATION
The magnet surface and counterplate may heat up. When installing, make
sure that heat dissipation is guaranteed.
| 34
Advertisement
Table of Contents
