Overview; Approved Combinations; Device Features - Pilz PSEN ml s 1.1 Operating Manual

Overview

3 Overview
3.1

Approved combinations

An approved combination (unit) consists of a safety switch and the corresponding actuator.
For information such as product type, features and order number, see
reference [
PSEN ml s 1.1
PSEN ml s 1.1 switch
PSEN ml s 2.X
PSEN ml s 2.1 switch
PSEN ml s 2.2 switch
3.2

Device features

}
Safe guard locking for swing gates and sliding gates
}
Safe interlocking (position monitoring)
}
Transponder technology
}
2 safety outputs
} Safety Device Diagnostics (SDD)
– Safety Device Diagnostics can be used to poll sensor information, to perform actions
– Manipulation protection in accordance with ISO 14119 is possible by verifying the
}
Diagnostic input for Y1 for Safety Device Diagnostics (SDD)
} Signal output/diagnostic output Y32 for Safety Device Diagnostics
}
Monitoring of shorts between the safety outputs
}
Guard locking element keeps the safety gate from being opened unintentionally
}
Auxiliary release for opening the safety gate
}
1 signal output
} Suitable for left and right hinged safety gates
}
Pilz coding type
– PSEN ml s 1.1: coded
– PSEN ml s 2.1: fully coded
– PSEN ml s 2.2: uniquely coded
}
M12, 12-pin male connector
Operating Manual PSEN ml s 1.1/2.1/2.2
1004710-EN-05
83].
Safety switch
Safety switch
and to read configuration parameters
short name of the actuator through the controller via SDD communication
PSEN ml 1.1 actuator
PSEN ml 1.1 round actuator
PSEN ml 2.1 actuator
PSEN ml 2.1 round actuator
PSEN ml 2.1 actuator
PSEN ml 2.1 round actuator
Order
Actuator
Actuator
| 11