Installation Types; Installation On Sliding Gate - Pilz PSEN ml s 1.1 Operating Manual

Installation
}
Torque setting: Please note the information provided under
Don't fully tighten the safety screws until the safety switches and actuators are correctly
aligned and the function has been tested (see
}
Installation of the safety switch and actuator must be concealed.
8.2

Installation types

8.2.1

Installation on sliding gate

Legend
1. Install the safety switch with the
actuator [
2. Use two M5 screws to fix the actuator to the gate.
Operating Manual PSEN ml s 1.1/2.1/2.2
1004710-EN-05
[2]
[1] Safety switch, installed on gate frame
[2] Actuator with mounting bracket (available as
sliding gate
46] or side-on to actuator [
Adjustment [
Accessory [
fixing screws of the safety switch in parallel to the
46] on the gate frame.
Technical details [
59]).
[1]
83]), installed on
73].
| 39