Warranty And Liability; Disposal; For Your Safety - Pilz PSEN ml s 1.1 Operating Manual

Safety
2.2.4

Warranty and liability

All claims to warranty and liability will be rendered invalid if
} The product was used contrary to the purpose for which it is intended,
}
Damage can be attributed to not having followed the guidelines in the manual,
}
Operating personnel are not suitably qualified,
}
Any type of modification has been made (e.g. exchanging components on the PCB
boards, soldering work etc.).
2.2.5

Disposal

} In safety-related applications, please comply with the mission time T
characteristic data.
} When decommissioning, please comply with local regulations regarding the disposal of
electronic devices (e.g. Electrical and Electronic Equipment Act).
2.3

For your safety

}
Do not remove the connector's protective cap until you are just about to connect the unit.
This will prevent potential contamination.
Operating Manual PSEN ml s 1.1/2.1/2.2
1004710-EN-05
WARNING!
Risk of injury due to loss of the safety function.
Substituting an actuator for an inappropriate actuator of the interlock and
guard locking system may lead to serious injury and death.
– You should prevent the interlocking and guard locking system from
being manipulated with an inappropriate actuator.
– Keep the substitute actuator in a safe place and protect it from unau-
thorised access.
– Install substitute actuators as described in
– Destroy any used actuators before disposal.
in the safety-related
M
Installation [ 38].
| 10