Auxiliary Release - Pilz PSEN ml s 1.1 Operating Manual

Installation
8.6

Auxiliary release

Install the auxiliary release on the safety switch as described in Installation external escape
release.
}
Use an 8 mm spanner to release the button handle.
}
Apply a low-strength threadlocker (e.g. a threadlocking adhesive) evenly on the thread of
the piston rod and then turn the red button handle as far as it will go. Max. torque setting:
1 Nm
To activate the auxiliary release the button handle must be unscrewed and then screwed
back on to the piston rod rotated 180°.
Operating Manual PSEN ml s 1.1/2.1/2.2
1004710-EN-05
Deactivated
Activated
| 58