Preparing The Vehicle For Rides On Wet Sand - GAS GAS MC 125 2022 Owner's Manual

7.5

Preparing the vehicle for rides on wet sand

–
Adjust the carburetor jetting and setting.
Info
The recommended carburetor tuning is available from your
authorized GASGAS Motorcycles workshop.
M01107-01
–
Clean the chain.
Chain cleaner (
–
Mount the steel sprocket.
–
Grease the chain.
Universal oil spray (
–
Clean the radiator fins.
–
Straighten the bent radiator fins carefully.
600868-01 Condition
Regular use in sand
–
Change the piston every 10 operating hours.
–
Check the radiator cap.
Value on the radiator cap
» If the indicated value does not correspond to the setpoint value:
M01129-01
–
Change the radiator cap.
PREPARING FOR USE 7
p. 122)
p. 123)
1.8 bar (26 psi)
Warning
Danger of scalding During motorcycle operation,
the coolant gets very hot and is under pressure.
–
Do not open the radiator, the radiator hoses or
other cooling system components if the engine
or the cooling system are at operating temper-
ature.
–
Allow the cooling system and the engine to
cool down before you open the radiator, the
radiator hoses or other components of the
cooling system.
–
In the event of scalding, rinse the area affected
immediately with lukewarm water.
21