3.
Installation
Please check every installation step in detail at <Annex 2: Installation and System Turn ON Progress
List> during the install.
3.1 Tools
The following tools are required to install the battery pack:
Wire Cutter
Crimping Modular Plier
Cable Ties
Screw Driver Set
Electric Screw Driver
Adjustable Wrench
Sleeve Piece
1000VDC Multimeter
NOTE
Use properly insulated tools to prevent accidental electric shock or short circuits.
If insulated tools are not available, cover the entire exposed metal surfaces with available insulated
alternatives, except their tips, with electrical tape.
3.2 Safety Gear
It is recommended to wear the following safety gear when dealing with the battery pack.
Il est recommandé de porter l'équipement de sécurité suivant lors de l'opération de la batterie.
Insulated gloves
Safety goggles
Safety shoes
Gants isolés
Lunettes de sécurité
Chaussures de sécurité
16