3.
Installation
3.1 Tools
The following tools are required to install the battery pack:
Wire Cutter
Screw Driver Set
Adjustable Wrench
NOTE
Use properly insulated tools to prevent accidental electric shock or short circuits.
If insulated tools are not available, cover the entire exposed metal surfaces with available
insulated alternatives, except their tips, with electrical tape.
3.2 Safety Gear
It is recommended to wear the following safety gear when dealing with the battery pack
Insulated gloves
Crimping Modular Plier
Electric Screw Driver
Sleeve Piece
Safety goggles
14
/34
Cable Ties
600VDC Multimeter
Safety shoes