Storage Recommendations; Shipment - Pylontech PowerCube-H1 Operation Manual

Lfp lithium ion energy
Hide thumbs Also See for PowerCube-H1:
Table of Contents

Advertisement

6.

Storage Recommendations

For long-term storage (more than 3 months), the battery cells should be stored in the temperature
range of 5~45℃, relative humidity <65% and contains no corrosive gas environment.
The battery module should shelfed in range of 5~45℃, dry, clean and well ventilated environment.
Before storage the battery should be charged to 50~55% SoC;
It is recommended to active the chemical (discharge and charge) of the battery every 3 months,
and the longest discharge and charge interval shall not exceed 6 months.
Caution: If not follow the above instructions for long term store the battery, The cycle life will have
relative heavily reduction.
Si vous ne suivez pas les instructions ci-dessus pour stocker la batterie à long terme, cela
réduira son cycle de vie.
7.

Shipment

Battery module will pre-charged to 100%SOC or according to customer requirement before
shipment. The remaining capacity of battery cell, after shipment and before charge, is determined
by the storage time and condition.
1. The battery modules meet the UN38.3 certificate standard.
2. In particular, special rules for the carriage of goods on the road and the current dangerous goods
law, specifically ADR (European Convention on the International Carriage of Dangerous Goods by
Road), as amended, must be observed.
40

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powercube-h2

Table of Contents