Chapter 8 Manufacturer Specific Control Object; Drive Recorder Status (Obj. 2C02H)]; [Drive Recorder Status (Obj. 2C02H: 00H)]; Clear Drive Recorder History (Obj. 2C03H)] - Mitsubishi Electric MELSERVO-J5 MR-J5 Series User Manual

8
Manufacturer Specific Control Object
8.1

[Drive recorder status (Obj. 2C02h)]

[Drive recorder status (Obj. 2C02h: 00h)]

Data Type Access
U16 RO
Description
The enabled/disabled status of the drive recorder is returned.
When the drive recorder does not operate or when the single sampling ends in manual setting mode, this object returns "0"
(disabled status).
When the drive recorder function is operating, this object returns "1" (enabled status).
0: Disabled status
1: Enabled status
8.2

[Clear drive recorder history (Obj. 2C03h)]

[Clear drive recorder history (Obj. 2C03h: 00h)]

Data Type Access
U16 RW
Description
Writing "1EA5h", cycling the power, or performing a software reset clears the data in the drive recorder history.
When the object is read, "0000h" is returned.
8.3

[Power ON cumulative time (Obj. 2C18h)]

[Power ON cumulative time (Obj. 2C18h: 00h)]

Data Type Access
U32 RO
Description
Returns the cumulative energization time of the servo amplifier.
8.4

[Number of inrush relay on/off times (Obj. 2C19h)]

[Number of inrush relay on/off times (Obj. 2C19h: 00h)]

Data Type Access
U32 RO
Description
The number of times that the inrush relay of the servo amplifier has been turned on/off is returned.
Mapping Default
Impossible 0
Mapping Default
Impossible 0000h
Mapping Default

Impossible
Mapping Default
Impossible 
Range Units
0 to 1 
Range Units
0000h to FFFFh 
Range Units
00000000h to hour
FFFFFFFFh
Range Units
00000000h to number of times
FFFFFFFFh
8 Manufacturer Specific Control Object
8.1 [Drive recorder status (Obj. 2C02h)]
Save Parameter
Impossible 
Save Parameter
Impossible 
Save Parameter

Impossible
Save Parameter
Impossible 
8
59