HOLDEN JH CRUZE Series ll Owner's Handbook Manual page 111

time. For security reasons, a four-digit
and randomly selected code must be
used for pairing devices.
Select Change Bluetooth code. On
the menu displayed, edit the actual
Bluetooth code and accept the
®
modified code using OK.
Connecting a mobile phone saved in
the device list
Select the desired mobile phone and
then select the option Select in the
menu displayed.
As soon as the Phone system has
detected the mobile phone, the
connection setup can be confirmed.
The mobile phone can be operated
via the Phone system.
Infotainment system
Note
If the device fails to connect, check
to ensure the device lists the vehicle
phone system. If it does not, delete
the device from the device list and
reconnect as a new device.
Removing mobile phone from device
list
Select the desired mobile phone from
the device list. In the menu displayed,
select Delete and confirm the
subsequent message.
Adjusting the ring tone
To change the ring tone
characteristic:
Press CONFIG button.
Select Phone settings and then Ring
tone.
Select the desired option.
To change the ring tone volume:
While the phone is ringing, turn the
m knob of the Infotainment system or
press the buttons + / - on the steering
wheel.
109