Electronic Key System - HOLDEN JH CRUZE Series ll Owner's Handbook Manual

Hide thumbs Also See for JH CRUZE Series ll:
Table of Contents

Advertisement

Fault
If the central locking system cannot
be operated with the remote control,
it may be due to the following:
■ Range exceeded,
■ Battery voltage too low,
■ Frequent, repeated operation of the
remote control while not in range,
which will require
resynchronisation,
■ Overloading the central locking by
operating at frequent intervals, the
power supply is interrupted for
a short time,
■ Interference from higher-power
radio waves from other sources.
Opening the vehicle 3 20.
Remote control battery
replacement
Replace the battery as soon as the
range reduces, or as per the service
schedule.
Extend the key and open the unit.
Replace the battery (battery type CR
20 32), paying attention to the
installation position. Close the unit
and synchronise.
Remote control synchronisation
After replacing the battery, unlock the
door with the key in the lock. The
remote control will be synchronised
when you switch on the ignition.
Keys, doors and windows

Electronic key system

(If fitted)
Makes operation of the following
possible without the use of the
mechanical key.
■ Central locking system
■ Anti-theft alarm system
■ Ignition and starter
The electronic key simply needs to be
on the driver's person.
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents