HOLDEN JH CRUZE Series ll Owner's Handbook Manual page 29

Seek the assistance of a workshop in
the event of faults.
Deactivation
Unlocking the vehicle by pressing
button c or pulling the door handle
(when the electronic key is in range)
deactivates the anti-theft alarm
system.
Alarm
When triggered, the alarm sounds via
a separate battery-backed power
sounder, and the hazard warning
lights flash simultaneously. The
number and duration of alarm signals
are stipulated by legislation.
The alarm can be silenced by
pressing any button on the remote
control or by switching on the ignition.
The anti-theft alarm system can be
deactivated only by pressing the
button c or by pulling the door handle
(only electronic key system) or
switching on the ignition.
Keys, doors and windows
Immobiliser
The system is integrated into the
ignition switch and checks whether
the vehicle is allowed to start with the
key being used. If the transponder in
the key is recognised, the vehicle can
be started.
The immobiliser activates itself
automatically after the key has been
removed from the ignition switch or
when the engine is switched off by
pressing the Start/Stop button.
If the control indicator d flashes or
illuminates when the ignition is on,
there is a fault in the system; the
engine cannot be started. Switch off
the ignition and then repeat the start
attempt.
If the control indicator continues
flashing, attempt to start the engine
using the spare key and seek the
assistance of your Holden Dealer.
Note
The immobiliser does not lock the
doors. You should always lock the
vehicle after leaving it.
Control indicator d 3 66.
27