HOLDEN JH CRUZE Series ll Owner's Handbook Manual page 153

If the cooling system is cold, the
coolant level should be above the
filling line mark. Top up if the level is
low.
9 Warning
Allow the engine to cool before
opening the cap. Carefully open
the cap, relieving the pressure
slowly.
Top up with antifreeze. If no
antifreeze is available, use clean tap
water or distilled water. Install the cap
tightly. Have the antifreeze
concentration checked and have the
cause of the coolant loss remedied by
your Holden Dealer.
Power steering fluid
Caution
Extremely small amounts of
contamination can cause steering
system damage and cause it to not
work properly. Do not allow
contaminates to come into contact
with the fluid side of the reservoir
cap/dipstick or to enter the
reservoir.
Vehicle care
Open the cap and remove. Wipe the
dipstick dry and turn the cap in the
reservoir. Open the cap again and
read the power steering fluid level.
The power steering fluid level must be
between the MIN and the MAX marks.
If the fluid level is too low, seek the
assistance of your Holden Dealer.
151