Hazard Warning Flashers - HOLDEN JH CRUZE Series ll Owner's Handbook Manual

Automatic light control function
When the automatic light control
function is switched on and the
engine is running, the system
switches the headlights and taillights
on and off according to ambient light
conditions.
Automatic headlight activation
During poor lighting conditions the
headlights and taillights are switched
on.
Furthermore the headlights are
switched on if the windscreen wipers
have been activated for several
wipes.
High beam
To switch from low to high beam,
push lever.
To switch to low beam, push lever
again or pull.
9 Warning
Always switch the high beam
headlamps to low beam when you
approach oncoming vehicles or
when other vehicles ahead. High
beam headlamps can temporarily
blind other drivers, which could
result in a collision.
Lighting
Headlight flash
To activate the headlight flash, pull
lever.

Hazard warning flashers

Operated with the ¨ button.
The hazard warning flashers activate
automatically if the airbags deploy.
79