HOLDEN JH CRUZE Series ll Owner's Handbook Manual page 105

■ "Yes": a suitable action is triggered
depending on the context.
■ "No": a suitable action is triggered
depending on the context.
Entering a telephone number
After the command "Dial" the speech
recognition requests input of
a number.
The telephone number must be
spoken in your normal voice without
any artificial pauses between the
individual numbers.
Recognition works best if a pause of
at least half a second is made after
every three to five digits. The
Infotainment system then repeats the
numbers recognised.
You can then enter further numbers
or the following commands:
■ "Dial": the inputs are accepted.
■ "Delete": the number last entered or
the block of numbers last entered is
deleted.
■ "Plus": a preceding "+" is entered
for a call abroad.
■ "Verify": the inputs are repeated by
the voice output.
■ "Star": An asterisk "*" is entered.
■ "Hash": A hash "#" is entered.
■ "Help"
■ "Cancel"
The maximum length of the telephone
number entered is 25 digits.
To make a call abroad, you can say
the word "Plus" (+) at the beginning of
your number. The plus allows you to
call from any country without knowing
the prefix for calls made abroad in that
country. Then say the required
country code.
Example of a dialogue
User: "Dial"
Voice output: "Please say the number
to dial"
User: "Plus Four Nine"
Voice output: "Plus Four Nine"
User: "Seven Three One"
Voice output: "Seven Three One"
User: "One One Nine Nine"
Voice output: "One One Nine Nine"
Infotainment system
User: "Dial"
Voice output: "The number is being
dialled"
Entering a name
Using the "Call" command,
a telephone number is entered that
has been stored in the telephone
book under a name (voice tag).
Commands available:
■ "Yes"
■ "No"
■ "Help"
■ "Cancel"
Example of a dialogue
User: "Call"
Voice output: "Please say the
nametag to call"
User: <Name>
Voice output: "Do you want to call
<Michael>?"
User: "Yes"
Voice output: "Calling"
103