HOLDEN JH CRUZE Series ll Owner's Handbook Manual page 68

66 Instruments and controls
Illuminates for a few seconds after the
ignition is switched on.
Illuminates when preheating is
activated. Only activates when
outside temperature is low.
Diesel particle filter
(If fitted)
% illuminates or flashes yellow.
Illuminates for a few seconds after the
ignition is switched on.
The diesel particle filter requires
cleaning.
Continue driving until % goes off. If
possible, do not allow engine speed
to drop below 2000 rpm until % goes
off.
Illuminates
The diesel particle filter requires
cleaning. Start cleaning process as
soon as possible.
Flashes
The diesel particle filter is full. Start
cleaning process immediately to
avoid damage to the engine.
Diesel particle filter 3 122.
Engine oil pressure
I illuminates red.
Illuminates for a few seconds after the
ignition is switched on.
Illuminates when the engine is
running
Caution
Engine lubrication may be
interrupted. This may result in
damage to the engine and/or
locking of the drive wheels.
1. Depress clutch.
2. Select neutral gear, set shift lever
to N.
3. Move out of the flow of traffic as
quickly as possible without
impeding other vehicles.
4. Switch off ignition.
9 Warning
When the engine is off,
considerably more force is needed
to brake and steer.
Do not remove key until vehicle
has come to a standstill, otherwise
the steering column lock could
engage unexpectedly.
Check oil level before seeking
assistance of your Holden Dealer
3 149.
Low fuel
i illuminates yellow.
Illuminates when level in fuel tank is
too low.
Catalytic converter 3 123.
Bleeding the diesel fuel system
3 153.
Immobiliser
d illuminates or continously flashes
yellow.