HOLDEN JH CRUZE Series ll Owner's Handbook Manual page 112

110 Infotainment system
Resetting the mobile phone to factory
settings
Select Phone settings and then
Restore factory settings.
Operation
Introduction
As soon as a connection via
Bluetooth has been set up between
®
your mobile phone and the
Infotainment system, you can also
operate many functions of your
mobile phone via the Infotainment
system.
Via the Infotainment system, you can
set up a connection to the telephone
numbers stored in your mobile phone,
change the telephone numbers, etc.
Note
Mobile phone operation continues to
be possible in the handsfree mode,
e. g. taking a call or adjusting the
volume.
After setup of a connection between
the mobile phone and the
Infotainment system, the mobile
phone data is transmitted to the
Infotainment system. This can take
some time depending on the phone
model. During this period, operation
of the mobile phone is possible via the
Infotainment system only to a limited
extent.
Not every telephone supports all
functions of the Phone system.
Therefore deviations from the range
of functions described with these
specific telephones are possible. For
further information, please refer to the
instructions for the telephone specific
adapter.
Setting the volume for hands-
free facility
Turn the m knob of the Infotainment
system or press the buttons + / - on
the steering wheel.
Dialling a telephone number
With the telephone main menu active,
press the MENU knob to open the
phone operation menu.
Several options for dialling telephone
numbers and for using the phone
book and call lists.