Traction Control System; Ride Control Systems - HOLDEN JH CRUZE Series ll Owner's Handbook Manual

Always apply parking brake firmly
without operating the release button,
and apply as firmly as possible on
a downhill or uphill slope.
When applying the parking brake,
depress the foot brake firmly at the
same time.
To release the parking brake, pull the
lever up slightly, press the release
button and fully lower the lever.
Control indicator & 3 64.
Brake assist
If the brake pedal is depressed
quickly and forcefully, maximum
brake force is automatically applied
(full braking).
Maintain steady pressure on the
brake pedal for as long as full braking
is required. Maximum brake force is
automatically reduced when the
brake pedal is released.

Ride control systems

Traction control system

Traction control system (TC)
improves driving stability when
necessary, regardless of the type of
road surface or tyre grip, by
preventing the driving wheels from
spinning.
As soon as the driving wheels start to
spin, engine output is reduced and
the wheels are braked individually.
This considerably improves the
driving stability of the vehicle on
slippery road surfaces.
TC is operational as soon as the
control indicator b extinguishes after
engine start up.
When TC is active b flashes.
Driving and operating
9 Warning
Do not let this special safety
feature tempt you into taking risks
when driving.
Adapt speed to the road
conditions.
Control indicator b 3 65.
Deactivation
TC can be switched off when spinning
of drive wheels is required: press
button a for approx. 2 seconds.
Control indicator k illuminates.
129