Maintaining The Led Panels; Cleaning The Led Panels - Christie Velvet Apex A2L Series Installation And Setup Manual

Maintaining the LED
panels
Learn the information and procedures for performing maintenance on the Velvet Apex.

Cleaning the LED panels

Learn how to clean the Velvet Apex panel.
Notice. If not avoided, the following could result in property damage.
• Always wear clean, lint-free gloves when handling the product.
To avoid the risk of damaging the LEDs, clean the panel only if absolutely necessary.
1. To clean the LED panels use a dry, clean, soft cloth with a low lint count or a paint brush to
remove any particles.
2. To remove loose particles between the LEDs, use filtered compressed air.
Ensure the air compressor does not spray oil or condensation.
Do not use the following products when cleaning the panels:
• Compressed air cans
• Liquids
• Abrasive cloths
Velvet LED Display System Installation and Setup Guide–Apex A2L Series
020-102873-01 Rev. 1 (06-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
38