Table of Contents
Advertisement
Local access to the MPC Open XP
Local access to the MPC Open XP
You can use the following items as a local user interface to an Open controller. These items let you access the
controller information, read sensor values, and test the controller.
Connect...
Field Assistant
1
application
Equipment Touch
device
1
Requires a USB Link (Part #USB-L)
2
See the Equipment Touch Installation and Setup Guide for detailed instructions.
CAUTION If multiple controllers share power but polarity was not maintained when they were wired, the
difference between the controller's ground and the computer's AC power ground could damage the USB Link and
the controller. If you are not sure of the wiring polarity, use a USB isolator between the computer and the USB
Link. Purchase a USB isolator online from a third-party manufacturer.
These are accessory items that do not come with the controller.
MPC Open XP
MPC Open XP IO48/816
Installation and Start-up Guide
To the controller's...
Local Access port
Rnet port
2
touchscreen
Carrier Proprietary and Confidential
For...
Temporary user interface for start-up
Temporary or permanent user interface
for start-up
28
CARRIER CORPORATION ©2017
All rights reserved
Advertisement
Table of Contents
