Local Access To The Uc Open Xp - Carrier UC Open XP Installation And Startup Manual

Local access to the UC Open XP

You can use the following items as a local user interface to an Open controller. These items let you access the
controller information, read sensor values, and test the controller.
NOTE At the present time, Field Assistant is the required local access user interface for UC Open XP start-up,
commissioning, operation, and troubleshooting. The 3 versions of BACview only provide rudimentary driver
information.
Connect...
BACview6 Handheld
keypad/display unit
Virtual BACview software
running on a laptop
BACview6
keypad/display unit
Field Assistant
* Requires a USB Link (USB-L)
These are accessory items that do not come with the controller.
See the BACview Installation and User Guide for instructions on connecting and using the BACview display.
UC Open XP/UC Open XP IO
To the controller's...
Local Access port
Local Access port*
Rnet port
Local Access port*
For...
Temporary user interface for driver
parameter access
Temporary user interface for driver
parameter access
Permanent user interface for driver
parameter access
Temporary user interface for start-up,
commissioning, troubleshooting, etc..
25