Document Revision History - Carrier i-Vu MPC Open XP IO48/816 Installation And Startup Manual

Document revision history

Important changes to this document are listed below. Minor changes such as typographical or formatting errors are not
listed.
Date Topic
6/20/17 Appendix A: MPC Open XP wire lists
2/23/17
1/18/17 Wireless sensor overview
To install the Wireless Adapter for
Wireless sensors
Wiring devices to the MPC Open XP's
Rnet port
Input wiring specifications
To wire the controller to the network
Wiring for communications
Specifications
Cover
What are the MPC Open XP and MPC
Open XP expanders?
2/19/16 Local access to the MPC Open XP
2/9/16 To attach the MPC Open XPIO expander Added step explaining jumper settings for connecting more than
12/3/15 Replacing the battery
11/18/14 MPC Open XPIO48 and MPC Open
XPIO816
8/14/14 MPC Open XP specifications
Wiring devices to the Rnet port
Connecting an SPT sensor
To wire an Equipment Touch to the
MPC Open XP
BACview devices
Local Access to the MPC Open XP
To wire the Equipment Touch to the
MPC Open XP
Restore factory defaults
* For internal use only
MPC Open XP
MPC Open XP IO48/816
Installation and Start-up Guide
Change description
Caution added to not use 39m library applications with the MPC
Open XP.
Changed sensor and adapter name from WS to wireless.
New topics
Updated format and added Wireless Adapter for Wireless sensors
Added Wireless Adapter for Wireless sensors
Added BACnet ARC156 connection information.
Changed from Wiring the MPC Open XP to the MS/TP network
Added BACnet ARC156 and updated Rnet port information to
include Wireless Adapter.
Changed MPC Open XP to new silkscreen
Added USB Link wiring caution.
one expander.
Corrected instructions from the wrong battery to the correct one.
Power rating corrected from 45VA to 40VA, as listed on the
silkscreen
Maximum number of BACnet third-party integration points using
Snap - changed to unlimited, depending on memory
Power - removed references to BACview
Rnet port - added Equipment Touch and removed BACview
Rnet port - added note that number of possible ZS sensors you
can have with an Equipment Touch is 15
Local Access port - removed BACview, added Equipment Touch
Battery - added Equipment Touch and removed BACview
Changed from "Wiring a communicating zone sensor to the MPC
Open XP"
Removed references to BACview
Removed BACview and added Equipment Touch
New topic
Removed references and topics
Removed BACview and added Equipment Touch
Added Caution to maintain polarity and use the power supply only
for Carrier controllers
Corrected from using a jumper to holding the Format button
Carrier Proprietary and Confidential
43
Document revision history
Code*
C-TS-CP-E-WB
C-D
C-D
C-D
C-D
C-D
C-D
C-D
C-D
C-TS-RD-E-JH
X-TS-RD-E-BR
X-D
C-D-LJ-O-BR
C-D-LJ-O
C-TS-RD-E
C-D-LJ
CARRIER CORPORATION ©2017
All rights reserved