NEC Express5800 Series Maintenance Manual page 213

Chapter 3 Appendix
Error
Class
code
Power 36
Power 37
Power 38
Power 3A
Power 3B
Power 3C
Power 3D
Power 3E
Power 3F
Power 40
Power 41
Power 42
Power 43
Power 44
Power 52
Power 53
Power 54
Error message
System Power Supplies Not Redundant
External Chassis Power Supplies Not
Redundant (Chassis %1)
%1 Storage System Power Supplies Not
Redundant (Chassis %2 Slot %3)
%1 Power Supplies Not Redundant (Enclosure
Serial Number %2)
%1 Power Supplies Not Redundant (Enclosure
Address %2)
System Power Fault Detected (XR: %1 %2
MID: %3)
System Power Fault Detected (XR: %1 %2
MID: %3)
Smart Storage Battery failure (Battery %1,
service information: %2).
Smart Storage Battery did not charge at the
expected rate, indicating a faulty battery
(Battery %1, service information: 0x03)
Smart Storage Battery disabled due to high
ambient temperature, will be re-enabled when
temp is lowered (Battery %1, service
information: 0x04)
Smart Storage Battery discharged to below
minimum voltage, resulting in the inability of
the battery to recharge properly (Battery %1,
service information: 0x05)
Smart Storage Battery has exceeded the
maximum amount of devices supported
(Battery %1, service information: 0x07)
Smart Storage Battery failure (Battery %1)
%1 Storage Enclosure Power Supply Failure
(Power Supply %2, Box %3, %4)
System Power Supply: %1 (Power Supply %2)
Power redundancy loss warning: server
power: %1W exceeded the redundant power
threshold: %2W
System Power Supply: %1 (Power Supply %2)
Express5800/R120h-1E, R120h-2E Maintenance Guide
Action
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Action is not necessary.
Action is not necessary.
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
1. IML Error Message
213