NEC Express5800 Series Maintenance Manual page 191

Chapter 3 Appendix
Error
Class
code
UEFI 355
UEFI 356
UEFI 357
UEFI 360
UEFI 361
UEFI 362
UEFI 363
UEFI 364
UEFI 371
Error message
IMPORTANT: Processor %1, DIMM %2 -
This NVDIMM-N was selected for
Sanitizing/Erasing. All data saved in the
NVDIMM has been erased.
NVDIMM Error - Sanitization Error -
Processor %1, DIMM %2
(SN:%3-%4-%5-%6) - This NVDIMM-N
was selected for Sanitizing/Erasing, but
this process was not successful.
IMPORTANT: Processor %1, DIMM %2 -
This NVDIMM is NOT a %3 NVDIMM.
Only %4 NVDIMMs are supported.
NVDIMM will be used as a standard DIMM.
IMPORTANT: The System Programmable
Logic Device revision in this system does
not meet minimum requirements for
operation with NVDIMMs. All NVDIMM
functionality has been disabled.
IMPORTANT: The Processor RAPL
wattage value is configured to an invalid
value. User provided value was %1,
but %2 has been assigned since it is
closest to %3.
IMPORTANT: The DRAM RAPL wattage
value is configured to an invalid value.
User provided value was %1, but %2 has
been assigned since it is closest to %3.
IMPORTANT: New NVDIMM(s) detected
on Processor %1. All NVDIMMs on
Processor %2 have been disabled.
NVDIMM Error - NVDIMM Controller Error -
Processor %1, DIMM %2. The controller
firmware has been corrupted. The OS will
not use the NVDIMM.
IMPORTANT: Processor %1, DIMM %2.
New NVDIMM detected and has been
disabled.
Express5800/R120h-1E, R120h-2E Maintenance Guide
Action
Action is not necessary.
Please take actions in the following order.
1. Restart sanitization of the NVDIMM.
2. Contact your sales representative.
Contact your sales representative.
Update the system programmable logic device. If the
problem persists, contact your sales representative.
Please take actions in the following order.
1. Set an appropriate value for Processor RAPL
wattage value.
2. If the problem persists, contact your sales
representative.
Please take actions in following order.
1. Set an appropriate value for DRAM RAPL wattage
value.
2. If the problem persists, contact your sales
representative.
Sanitize the NVDIMM connected to the corresponding
processor. If the problem persists, contact your sales
representative.
Please take actions in following order.
1. Update the NVDIMM firmware.
2. Contact your sales representative.
Sanitize the NVDIMM connected to the corresponding
processor. If the problem persists, contact your sales
representative.
1. IML Error Message
191